Danfoss 1500 Piston Pump (32.1-118 gpm)
Type: APP 22 / 1500
Integrated Flushing Valve: Yes
Flow at Maximum Speed: 361.7 l/min
Minimum Speed: 700 rpm
Maximum Speed: 1500 rpm
Maximum Pressure: 70 Bar
Ports / Connections (In, Out): M52 x1.5, M52 x 1.5
Housing Material: Duplex / Super Duplex Stainless Steel
Availability: See “Additional Information” below
Danfoss pumps are designed to supply low viscosity and corrosive fluids under high pressure, eg. in seawater reverse osmosis filtration applications and for high-pressure salt water pumping.
The pumps are based on the positive displacement principle (axial piston design) which enables a very
light and compact design, and they are designed so that the lubrication of the moving parts in the pumps is provided by the fluid itself. No oil lubrication is thus required.
The pumps are supplied with an integrated flushing valve that allows the salt water to flow from the inlet to the outlet when the pump is not running.
All parts included in the pumps are designed to provide long service life, i.e. long service life with constantly high efficiency and minimum service required.
The pumps are fixed displacement pumps in which the flow is proportional to the number of revolutions of the input shaft and the pump displacement.
Details on APP 16 – 22
7.3 – 26.8 m3/h (32.1-118 gpm)
30-70 barg (435-1015 PSIG) at 1500 rpm
30-80 barg (435-1160 PSIG) at 1200 rpm
Integrated flushing valve
Usually Ships in 7 to 10 Days
|International Article Number (EAN)||
|Export Commodity Code||
DANFOSS (Made in Denmark)